The lion radiator tells you where the radiators are placed in the bedroom where is the warmest

New types of radiators with different colors and shapes are becoming more and more popular. Many people have broken through the hanging spots of traditional heating and used beautiful radiators as a living room artwork. However, Lions Radiator warm reminder, while beauty, but also to take into account heating, the installation position is extremely important.
As we all know, hot air flows upwards. If the heater is hung too high, the heat at the top of the room is easily concentrated. The actual temperature felt by the person is lower than the design temperature, which not only causes energy waste, but also increases the user's heating cost.
Although the new radiator is highly adaptable and can be placed in any corner of the room, from the perspective of obtaining the best heating effect, it should be placed in a place with strong “cold radiation” such as under the window. Because the temperature of the windows in the room is the lowest, the descending air currents are mostly concentrated in this area. If a properly sized radiator is installed under the windows, cold radiation and cold air circulation can be prevented. When people approach cold windows, they do not noticeably feel Cold air intrusion. Especially in the rooms with floor-to-ceiling windows and large bay windows, short heat sinks are installed under the windows to enhance thermal comfort. If narrow and high heat sinks are used and installed on the side walls, not only the temperature distribution is uneven, but also cold air flow will be reduced, thus reducing comfort.
In some rooms without windows, heating can be installed near people's regular activities. For example, the heating of the bathroom can be installed next to the shower or toilet, but the position must be slightly lower, so as to increase comfort.
Water seepage often occurs in connection between radiators and plastic pipes. In addition, if there is a place where the copper joint is connected, the heating coil buried in the floor should pay more attention. There are no good methods for how to deal with seepage problems. In the procurement of recommended materials, the standards for the collection and the water separator must be implemented in accordance with the specifications. Especially in the operation of the system, maintenance and repair measures should be strengthened.

Roll Rings

Description: Also called as roll ring or roll collar, there are two types: vertical roll sleeves and horizontal roll sleeves. The roll sleeves mainly produce by centrifugal casting, to ensure better work layer with high wear resistance, and adopt compound materials.

Material: Adamite, high chromium iron, alloy cast iron or as per the customer`s requirement.

Barrel Diameter: 3200mm maximum  

Type: Single rolls, double pouring cast rolls.

Casting: Static casting, centrifugal casting.

Heat treatment: annealing, normalizing, quenching, and tempering.

Roll Rings

Rolls Sleeves,Profile Steel Mill Roll Rings,High Chromium Iron Roll Rings,Alloy Cast Iron Roll Rings

Shijiazhuang BKDR Metallurgical Science & Technology Co.,Ltd , https://www.bkdrtech.com