According to the data, on the 17th, the domestic comprehensive transaction price of steel has fallen below 4,100 yuan/ton mark to 4,086 yuan/ton, which is close to the low point in 2010. Today, the price decline continues unabated, setting a new low. From the perspective of price trends, the domestic steel price decline this year is quite similar to 2010, both from the beginning of mid-April, and continued until mid-July. However, the price level was even higher in mid-April, 2010. The price index showed that the then high was 4,865 yuan/ton, which had been unilaterally dropped to 4,083 yuan/ton on July 16, a decrease of 16.1%; this year it was high in April. Points only 4,492 yuan / ton, to July 18 fell less than 10%.
In mid-April, the domestic steel price began to decline, and there was a brief stable operation in June. However, after entering July, the steel price ushered in a new round of accelerated decline, and prices of various varieties in various markets fell below 4,000 yuan/ton. , 3900 yuan / ton and 3800 yuan / ton mark. By the 18th, the high price in the Shanghai market had dropped to 3,640 yuan/ton, and the secondary rebar (20mm) also fell to 3,700 yuan/ton. The price data shows that the comprehensive transaction price of steel in July has dropped by 147 yuan/ton, a decrease of 3.5%.
According to analysis, overcapacity and economic growth are the main reasons for the decline in domestic steel products this year. Although domestic policies for steady growth have been strengthened since May, July to August are the traditional off-season for steel consumption, and the policy effect is relatively limited. At the same time, domestic steel production remained at a high level. In June, the average daily output of crude steel in China reached the second highest level of 2.007 million tons. In the first half of July, the average daily output of crude steel was still estimated to be 1.5851 million tons. The current decline in steel prices and the billet, iron ore and other raw materials form a vicious cycle, short-term prices or difficult to stop falling.
Color Wrap Film for car body wrapping have gloss,matte, metallic,chrome, chameleon,diamond,holographic,brushed finish and all car color wraps with imported Ishland glue and diamond air channels with good stretchable,very good to install and last long time outside over 3-5 years.
1.Water Resistant and UV Protected.
2.Invisible Air-Release Channel, easily get rid of bubbles during installation.
3.Strong self adhesive, eliminate bubbles, peel and stick application.
4.Gloss and smooth finish.
5.Stretchable with heat.
6.Easy to clean with soap and water.
7.Long lasting for approximately 5 years indoor use and 3 years outdoor use.
8.It can also be applied onto most smooth painted or metalized surface such as cell phone, laptop, home appliances, table and even cabinet and much more.
1. Clean off any dust, dirt or wax or other things before installation.
2. Measure the amount of protective film needed for the part to be fixed.
3. There is a transparent protective film on the surface which must be peeled off before use.
4. With a hair dryer, let the film be flexible and reduce wrinkles.
5. Even though it is waterproof, it cannot be completely submerged in water.
6. After assembly, please leave the car under the sun within 48 hours or do not wash the car in the meantime. Do not let the car stickers touch the water after installation for 48 hours.
Installation Tips
Matte Car Wrap,Car Wrap Film,Car Wrapping Film,Gloss Car Wrapping,Car Wrapping Vinyl
Guangzhou Fuyulai Technology Co.,Ltd , https://www.fuyulaifilm.com