It has been estimated that the amount of tires consumed and the number of repairs in the same period are related to individual driving skills, and the difference in consumption and maintenance costs can reach 10% to 30%. The maintenance and maintenance of tires can be discussed from two aspects. One is the road surface factor and the other is the human factor. However, the decisive factor is still considered as a factor. The road surface factor is sometimes unavoidable. For example, sometimes it must pass through the ice stone, construction site and Garbage roads, which caused punctures and punctured tires. In the face of this situation, we can only try to be as careful as possible or as far as possible. The following mainly talk about human factors.
Some young people like to perform some car skills, such as: turning around in the head, single-wheel driving, emergency braking, drifting, etc., tricycles lift a wheel and so on. When I changed the tires, I realized that the price paid was quite a lot! All of the above practices are very tire-damaging, which not only accelerates the wear of the tires, but also is detrimental to the engine and should be avoided as much as possible. Drivers should develop good driving habits, which not only saves tires, but also extends the life of the engine. Such as: start and brake should be gentle; when going uphill, you should diligently shift gears to avoid starting in the middle; don't overdo the road when you are over the pit; don't lend the car to people who lack driving skills; The habit of starting the frame allows the car to completely “burden†when resting, which is an effective way to maintain the tires.
The last point is often overlooked by the friends. That is, the phenomenon of "eat the tires", the so-called "eat the tires", is that the tires on the left and right sides of the tires wear different degrees. Common reasons are: the sprocket adjusters on the left and the right are not the same scale, the front and rear wheels are not in a line, the front and rear axles are not parallel, and so on. If Moyou finds his car has
If you have a baby, you should find out the cause as soon as possible, carefully adjust it, and finally solve the problem of “eat the tire†thoroughly, because “eat tire†is a fatal injury to motorcycle tires, and it wears faster than other methods. In addition, the maintenance work on the tires should be to add appropriate pressure to the tires. If necessary, the tires should be refilled according to the air pressure marked on the tires, because the air pressure is directly related to the service life and performance of the tires. If the air pressure is found to be low, the cause of the leak should be ascertained. Is the gas leaking or slow? Air leaks should check for leaks in the valve core or for other reasons. Slowly squirting can inject a small amount of talc (about 30g) into the tire, which can solve the problem of slow gas spreading.
We are professional manufacturer of Injection Moulding Machine from China,high speed Injection Moulding suitale for thin thickness product which save cycle time.
High Efficiency Energy Saving Injection Molding Machine adopts proportional pressure and flow control, the pressure and the speed can be adjusted, stable movement curve and gentle shock, the computer is imported from Industry family.The LCD displaying screen with high clarity has Chinese and English language to use.Close-loop PID temperature control with the advantage of high precision.The operating table of the injection moulding machine have two safety, one is machine safety, another is electrical safety, that ensures the operators's safety.
DO BEST,TO BE GOOD
High Speed Injection Molding Machine
High Speed Injection Molding Machine,Injection Moulding Machine,Economial Molding Machine,High Speed Molding Machine
BUEN MACHINERY CO.,LTD , http://www.buenmachine.com