How to identify accidents used cars? Recently, Xiao Bian visited auto repair plants, used car dealers, etc., to uncover the devastation of the accident car into the shady general car into the used car market.
Accident car definition:
1. Damage to the engine compartment and cockpit after heavy impact
2 tank bracket collision damage vehicle
3. Vehicle body rear wing damage is more than half of its vehicle
Non-accident vehicles are those vehicles that have been lightly bumped and have only damaged the front and rear bumpers and their associated accessories, including the exterior body panels.
Several types of accident vehicle identification methods:
1. Mild rear-end collision is one of the accidents that often occur in the process of a vehicle. Check if you have caught the tail and start from the front of the body. First open the engine cover and check if the edge of the engine cover is flat and the touch feels soft. If the rubber strip is found to be uneven or the touch is soft, the engine cover should be repaired.
2. The main beam and the Yuanbao frame of the car body are the main source of the determination of whether or not a heavy rear-end collision occurred. If it is found that the main beam has a welding port, it is certain that the car has experienced a heavy impact. The two small rotary boxes on the shock absorbers must also be made of original rubber. If they are not original rubber, they will also have a rear-end collision. The determination method is the same as above. In addition, the rivets on the tank frame should all be knocked by the machine, and the material is iron. If it is found that it is replaced by aluminum rivets, it can be judged as an accident.
[Contrast between accident car and non-accident car]
3, to know if it is very simple to turn over the car, if a car is overturned, after the maintenance staff is repaired again, it must be painted for the treatment, hit the top of the car, the normal situation will be a particularly brittle sound, if the sound Boring is because of paint. That is basically turning the car.
4. By observing the joints of the longitudinal beams of the water tank and the fenders. If it is found that the solder joints are convex, there are out-of-round or uneven spot welds, the joints are not smooth, and the arrangement is irregular and uneven. This indicates that it is a re-welding mark, which proves that the tank frame has been impacted.
5, through the body color to identify the accident of used cars. If there are signs of paint undulations on the exterior surfaces of the door and the front and rear fenders, the color and gloss of the body paint are not uniform, and the peripheral glue sticks are stained with paint, it can be judged whether the body has been bumped or the paint has been repaired.
So when you want to go to the used car trading market to buy used cars, be sure to recognize these methods will not go wrong.