Magnesite ore dressing is mainly based on heavy medium and hot selection. With the progress of science and technology and improve the quality of the concentrate, the current flotation and chemical processing has become an important means of magnesite ore purification.
Flotation method is one of the main methods for treating magnesite. For gangue minerals, silicate minerals such as talc and quartz are mainly used. At the natural pH of the slurry, amine cation collectors are usually added during flotation. And the foaming agent can achieve good results, the purity of magnesite is increased to 95%~97%. The beneficiation process is: 1 crushing and screening: raw ore crusher and roller crusher with particle size less than 200mm And the vibrating screen consists of two sections and a closed circuit to 10~0mm for ball mill feeding; 2 grinding grade: -10mm ore through a closed-circuit grinding, grinding to -200 mesh accounted for 70%, into flotation operation; Selection: The flotation process consists of reverse flotation (one coarse and one sweep) and positive flotation (one coarse and one fine). The former selects all tailings, and the latter obtains magnesium concentrate and medium ore.
Light burning: Magnesite is calcined at 750~1 100 °C and called "light burning". Its product is called light burnt magnesium powder. Since the reduction of magnesite is generally about 50%, the content of MgO in the ore can be almost doubled by light burning. In this sense, light burning is the most effective means of enriching MgO.
In addition, light burning is also a preliminary job for hot selection of magnesite and some re-election. Light burnt magnesium has high activity and is an ideal raw material for the production of high-density magnesia.
Thermal selection method: The difference in thermal properties between magnesite and talc is caused by the difference in density and hardness between the two after calcination, and then the mineral is separated by selective crushing and simple screening or classification. The flotation process is simple and low in cost.
Haicheng magnesite is purified by reverberatory kiln light burning-hot selection method. The test ore is a Haicheng first-class mine with a particle size of 50-200 mm. The reflection kiln is 7.8m3, the light burning temperature is 750~1 100°C, and the residence time is 2h. The ore sieve after light burning is divided into two parts of -5 mm and +5 mm. The -5mm part is then finely ground in a 4R suspension roll mill. Among them, -120 is a high-purity light burnt magnesium powder. The combination of +120 mesh and +5mm is a commercial light burnt magnesium. The high-purity light-burned magnesium powder is then compacted into a high-purity magnesia.
Magnesite ore dressing, in addition to the above flotation method, light burning method, hot selection method, there are re-election method, electric selection method, radiation beneficiation method, magnetic seed sorting method, and the like. These latter methods are not used much in China.
Precipitated Calcium Carbonate
Uses: Can be used as filler in rubber, plastics, paper, paint and ink industries. Widely used in organic synthesis, metallurgy, glass and asbestos production. It can also be used as a medium seeding agent for industrial waste water, a antacid for stomach and duodenal ulcers, a detoxifying agent for acidosis, a SOâ‚‚ eliminating agent in SOâ‚‚-containing exhaust gas, a dairy cattle feed additive and an anti-sticking agent for oil felt . It can also be used as a raw material for tooth powder, toothpaste and other cosmetics.
Usually used as a filler, widely used in daily chemical industries such as artificial floor tiles, rubber, plastics, papermaking, coatings, paints, inks, cables, construction supplies, food, medicine, textiles, feed, toothpaste, etc., as a filler to increase products The volume is reduced, and the production cost is reduced.
Light Calcium Carbonate is made of limestone, and can be used in daily chemical products such as tooth powder, toothpaste, cosmetics, etc. It can also be used in organic synthesis, metallurgy, glass and asbestos production.
The particle size of light calcium is smaller than that of Heavy Calcium Carbonate, the oil absorption is larger than that of heavy calcium carbonate, and the price is higher than that of heavy calcium carbonate. They are all commonly used fillers in latex paint, and they are best used together. Light calcium is better in terms of sedimentation, but its oil absorption is greater than that of heavy calcium, and the price is generally more expensive than heavy calcium. Although it is not as stable as heavy calcium, it is stable. Even for exterior wall paint, its application amount is also very large. of.
Precipitated Calcium Carbonate,Precipitate Calcium Carbonated Powder,Precipitated Calcium Carbonate Manufacturers,Activated Precipitated Calcium Carbonate
Henan Shunbang Chemical Industry CO.,Ltd , https://www.pvcresinchemical.com