No matter what kind of machinery, regular maintenance can effectively maintain its work efficiency and product quality. Computer engraving and milling machine is no exception, it is very important for the maintenance of computer engraving and milling machine accessories. The failure of the computer engraving and milling machine stems from problems with parts and components. If you find problems and deal with them in a timely manner, you can avoid the expansion of the situation. If you turn a blind eye, it can cause very large losses. Therefore, it is very important to maintain the components of the computer engraving and milling machines.
1. When operating the computer engraving and milling machine, it must be ensured that the guide surface is clean, and no chips, abrasive particles, etc. will fall on it. If it is, the friction of the guide rail will increase, and the guide rail will also be rusted. The rails need to be regularly maintained and maintained.
2. The guide rail needs to be kept lubricated to avoid problems such as friction, resulting in increased temperature. The guide rails are normally lubricated automatically. If it is found that the guide rails are not lubricated, check the diverter valves.
3, must check the guide rail lubricant amount every day, if the oil is not enough, should add the lubricant; At the same time should pay attention to check whether the oil pump can start and stop regularly, and pay attention to whether can provide the lubricant at the time of starting.
4, when processing graphite and ceramics, please use graphite computer engraving and milling machine. Because the processing of graphite and ceramic materials, processing dust, easy access to the guide, affect the service life.
In the process of computer sculpting and milling machine closely following the use, regular maintenance can maintain the operating effect of the computer engraving and milling machine, prolong its service life, and ensure the quality of engraving and milling.
1. When operating the computer engraving and milling machine, it must be ensured that the guide surface is clean, and no chips, abrasive particles, etc. will fall on it. If it is, the friction of the guide rail will increase, and the guide rail will also be rusted. The rails need to be regularly maintained and maintained.
2. The guide rail needs to be kept lubricated to avoid problems such as friction, resulting in increased temperature. The guide rails are normally lubricated automatically. If it is found that the guide rails are not lubricated, check the diverter valves.
3, must check the guide rail lubricant amount every day, if the oil is not enough, should add the lubricant; At the same time should pay attention to check whether the oil pump can start and stop regularly, and pay attention to whether can provide the lubricant at the time of starting.
4, when processing graphite and ceramics, please use graphite computer engraving and milling machine. Because the processing of graphite and ceramic materials, processing dust, easy access to the guide, affect the service life.
In the process of computer sculpting and milling machine closely following the use, regular maintenance can maintain the operating effect of the computer engraving and milling machine, prolong its service life, and ensure the quality of engraving and milling.
The Engine Parts cover all the brand engine parts in China. Our main product cover: WEICHAI/FAWDE/SDEC/DEUTZ/YUCHAI/CUMMINS/QUANCHAI/PERKINS/CHANGCHAI and also some gearbox brand like QIJIANG/FAST/QJGT/ZF. We can provide you the realiable quality and best price truck parts to maintance your after market service. Our main product:
- engine parts; cylinder liner, piston, piston ring, oil seal, connection rod Bearing, starter, injection pump, oil pump, water pump, air filter, oil filter and fuel filter;
- gearbox parts; gear, PTO, shaft and bearing.
Yuchai Engine Parts,Yuchai Small Engine Parts,Yuchai Engine Components,Yuchai Car Engine Parts
Jinan JF Co., Ltd , https://www.jfsinotruk.com