How to check the quality of small diesel generator spray?

Install the injector of the small diesel generator on the tester, shake the joystick 60 to 70 times per minute, and judge the spray quality according to the injection status of the injector, as shown in Figure 5-77.
The specific requirements for small diesel generator injector spray are as follows.
1 The fuel sprayed should be in the form of a mist. The distribution should be fine and uniform. There should not be obvious splash oil droplets and continuous oil droplets, and there should be no local thick and uneven phenomenon.
2 The beginning and the end of the injection should be obvious and should be accompanied by a crisp sound; there should be no drip before and after the injection; after multiple injections, the vicinity of the injection port should be kept dry or slightly moist.
3 spray cone angle: The normal situation is centered on the centerline of the spout, approximately 40 conical spray.
Inspection method: Place a piece of white paper at 100-200mm just below the injector, shake the small diesel generator's joystick to make the injector spray once, measure the diameter D and the distance from the spray on the white paper. Oil collector mouth distance H, spray cone angle: a = 2arctan (D/2H)
If it does not meet the requirements, the injector should be cleaned; if the requirements are still not met after cleaning, the injector should be replaced.

For more information, please click:

Shanghai Gasoline Generator

Large gasoline generator


Online TIJ Printer

Thermal Inkjet Technolog

TIJ is a thin film resistor, which heates less than 0.5% of the ink in the ink ejection area to form a bubble. The bubble expands at a very fast speed (less than 10 microseconds), forcing ink droplets to eject from the nozzle. The bubbles continue to grow for a few microseconds and then disappear back to the resistor. When the bubbles disappear, the ink of the nozzle retracts. Then the surface tension produces suction.

Tij Printer,Tij Inkjet Printer,Date Code Inkjet Printer Manufacturer in China

GUANGZHOU INCODE MARKING TECHNOLOGY CO., LTD. , https://www.gzincode.com