High Accuracy Stud and Track Roll Forming Machine

Model NO.: LL-LZ-55-12
Origin: Tianjin China
HS Code: 84552210
A.Main technical parameter
1, Raw Material : hot-dip galvanization steel strip
2, The thickness of the raw material: 0.5-1.8mm
3, The width of the feed-in: 400mm
4, The inner diameter of the steel coil : 508-600mm
5, The outer diameter of the steel coil : 1200MM
6, Main forming machine motor:Electromagnetic speed motor 7.5kw
7, Working voltage 380v 50hz  control voltage 24v
8, Forming steps: 12steps 
9, Main forming machine use welded steel structure 
10, Transmission mode : gear wheel transmission( the material of the gear wheel use 45# steel, the surface disposed by high frequency )
11, Roller shaft use 45# steel, modulation disposal, the hardness of the modulation is  HB250-280.surface grinding. The outer diameter is 60mm
12, Roller mould use Gcr15,salt bath quenching.hardness is HRC58-62
13, The fastest production speed 0-22M/ minute
14, Tolerance:  +/-0.50mm
15, Feed-in material way : from left to right 
B .cutting equipment 
16, hydraulic pressure qua power switch off
17, The ability of the cutting: 6tons
18, Hydraulic system pressure: 12Mpa. Work pressure 5Mpa
19, The form of the cutting: 45 degree skew
20, cutting scrap: no
21, The cutting machine frame use the high structural frame welding
22, The cutting mould is mould steel CR12, salt quenching hardness  is HRC60-62 
23, Cutting length tolerance <= 1.5mm 
24, Steel structure frame 
25, Max bear weight of machine is 2tons
C.The whole production line 
Feed-in machine --- material right/left guide --- correct calm machine - molding mainframe - roll mould ---finished product correct straight machine --- hydraulic prssure cutting equipment( hydraulic pressure station) ----- track cutting stepped vehicle - sever mould ---- received frame of material --- electric control box  
D.Meas of the machine:
Main electric  L 5000mm X W 1650mm X H 1250mm
Length of the production line L 14500mm×W 1650mm X H 1250mm
The volume of production L 20000mm X W 4000mm 


High Accuracy Stud and Track Roll Forming Machine
 

DSB Spinning Reel Series

Product Description

5.2:1 or 6.2:1high speed gear system
Front drag
Thick bail arm
Super strong drive gear
Hight intensity graphite material
Micro-adjusting drag system
Excellent line lay osciallation system
one-way clutch ball bearing

gear ratio of 5.2:1 or 6.2:1 is available

Gear Ratio 5.2:1
6.2:1
Bearings 3+1
12+1


ITEM Gear Ratio Ball Bearing Line Capacity(mm/m;Lbs/yds)-Standard Line Capacity(mm/m)-Shwallow OWC
DSB1000 5.2:1 3+1BB-12+1BB 0.18/205 0.20/170 0.25/100; 4/175 6/110 8/90 0.12/150 Y
DSB2000 6.2:1/5.2:1 3+1BB-12+1BB 0.20/245 0.23/180 0.28/115; 4/240 6/160 8/125 0.20/150 Y
DSB3000 6.2:1/5.2:1 3+1BB-12+1BB 0.28/155 0.31/125 0.36/95; 8/180 10/150 12/110 0.22/150 Y
DSB4000 6.2:1/5.2:1 3+1BB-12+1BB 0.28/225 0.31/180 0.36/135; 8/270 10/220 12/160 0.24/150

Dsb Spinning Reel Series,Micro Spinning Reel,Rod Fishing Reel,Saltwater Rod And Reel

CIXI DONGSHANG FISHING TACKLE CO.,LTD. , https://www.dongshangreels.com