First, the oil circuit, circuit inspection
In the hot season, the occurrence of spontaneous combustion of tank cars will be more and more, and the frequency of auto-ignition accidents is the highest in high-heat-day vehicles. The reason may also be due to the failure of the oil circuit and the circuit. The driver of the tanker driver should strengthen the inspection of the oil circuit and the circuit in the summer. Especially those old cars that have a relatively long service life. Because there is electricity in the front and there is oil, and the tank is filled with oil, it is easier to get a fire when the spark touches the oil, so that the gasoline will accelerate the spread of the fire. Happening. In the summer, it is relatively easy for the tanker to be parked outdoors for a long time to cause heat accumulation. Causes the temperature of the mailbox, engine, circuit, etc. to rise. If there is a fault in the circuit, it is easy to produce sparks and spontaneous combustion occurs.
Second, the tanker should not be placed flammable materials
In the summer, not only is it necessary to constantly check the use of the oil circuits and circuits, but it is also important to note that no flammable items should be placed in the vehicle. Of course, tankers are a special feature. The vehicles are also not allowed to place those forbidden objects. When the vehicle is parked, it is also necessary to say that the vehicle should not be exposed to the sun as much as possible.
Third, the choice of insulation film
When entering the summer, some car owners should all be confronted with the need to apply insulation film. The insulation film is a passion for keeping the sun at a low level, as well as the effect of UV protection and heat insulation. It can make the temperature inside the car more comfortable. However, the user and type of insulation film also have a very strict distinction, and some owners have misunderstandings about the insulation film.
The heat insulation film can be divided into a side windshield film and a front windshield film. The most demanding insulation film is the front windshield. According to the regulations of the traffic regulations, the front windshield of the vehicle must be evaded by 70 percent. Under the premise of not affecting the safety of the vehicle, it is an opportunity for those dark-colored insulation films. (Text / Sun Ni)
The Elastic Warping Machine, also known as spandex warping machine, is a textile machine used to produce elastic fabrics. It is designed to warp a wide range of elastic materials, including spandex, Lycra, and other stretchable fibers.
The machine consists of a creel, a warp beam, a tension control system, and a warping section. The creel holds the spools of elastic yarn, which are then fed into the warping section. The tension control system ensures that the yarn is evenly distributed and maintains a consistent tension throughout the process.
The warping section consists of a series of rollers that pull the yarn through a series of guides and onto the warp beam. The elastic yarn is then wound onto the warp beam, creating a tightly-woven fabric that can stretch and recover without losing its shape.
The Elastic Warping Machine is widely used in the production of a variety of elastic fabrics, including swimwear, athletic wear, lingerie, and medical garments. It is a highly efficient and cost-effective way to produce high-quality elastic fabrics with consistent performance and durability.
Elastic Warping Machine,Horizontal Warper Advantage,Vertical Warper Advantage,Spandex Warper Specification
suzhou cotex international Co.,Ltd , https://www.macanol.com