Keywords: heat pump safety water unit paralysis First, the unit's own security risks
1. This unit must be equipped with a dedicated power supply that requires tight control of voltage fluctuations (-10% to + 10%).
2. Due to technical immaturity, the unit is likely to continue its work (as usual) under hazardous conditions even in the event of a short circuit.
3. Therefore, the unit must be equipped with a dedicated automatic air switch, absolutely prohibit the use of knife switch, and the current control is also very strict (ratio of 1.5 times) and to configure phase protection.
Second, inconvenient to use more reliable
1. As long as it is restarted after shutdown, power-on warm-up time is very long, it must be 12 hours later.
2. If the unit stops the heating operation in winter, the controller must keep communication with the unit and must not be cut off, otherwise the pipes will be cracked, the unit is in a state of paralysis, the more serious is the whole machine is frozen, the difficulty of maintenance can be Think of it (because the power is beyond the control of human beings, there may even be a power failure inadvertently operating mistakes).
Third, the instability of water
1. Need to measure the adequacy of water in advance and reliable testing of water quality, credibility.
2. It is absolutely forbidden to have the same source of use upstream of the water source or the unit will not function properly.
Fourth, the winter heating effect is not ideal
1. Than the normal air-conditioning heating temperature is low 5-6 ℃.
2. Need to configure auxiliary heating equipment.
Fifth, the use of the host switch is more stringent requirements: frequent operation will lead to paralysis unit (not more than four times per hour).
Six, the water system to be equipped with expansion tank, the circulating water must be clean, or quickly scaling effect of use and operation must be to maintain adequate water flow, otherwise it will cause the water heater cracking, more often to clean the water Filter, inconvenience to use. Water source heat pump in use to be shut down for maintenance.
Seven, the unit in the overall system maintenance more complicated and difficult.
Eight, serious groundwater pollution.
Ningbo City Yinzhou Ruican Machinery Co, Ltd is direct manufacturer, covers the sand casting Foundry, Investment Casting Foundry and Machining Workshop, and offer the Ductile Iron Grey Iron Sand Casting parts, investment casting parts, Aluminium casting
and precision machining parts.
The produced parts are widely used in Auto Parts : Agricultural, Marine; Architectural, Machinery, Medical; Food Machinery, Valves and so on. The material which we used Aluminium; Bronze; Brass; Copper; carbon steel; stainless steel and so on.
At the same time, we can offer the CNC MACHINING; Phosphating; Blackening Processing; Hot Dip Galvanizing: Powder Coating: Painting: Plating, Assembly for customers. 85% products are sold to overseas, the customers are from America, Canada, Europe Union, ect. i 15% products are sold in National Market. There are about 200 employees in our company now and around 10 technicians from medium to senior. We have the manufacturers and tester equipments, such as medium frequency furnaces; shot blaster; hardness tester; Spectrum Analysis tester; Metallurgical analysis tester, CMM; crack detection; surface roughness tester ISO9001: 2008 and TS16949 systerm to be sure the quality.
Stainless steel handles and hinges,Investment casting handles and hinges,Investment Casting Door Hardware,Investment Casting Furniture Hardware
Ningbo City Yinzhou Ruican Machinery Co.,Ltd , https://www.factoryforging.com