Water Circulating Multi-purpose Vacuum Pump/Laboratory Instruments
The Introduction:
   Providing vacuum condition for the processes of evaporation, distillation, crystallization, drying, sublimation, filtration and decompression, degassing and so on, particularly be suitable for labs and small scale test of industries such as universities and colleges, scientific research institutes, chemical industry, pharmacy, biochemistry, foodstuff, pesticide, agricultural engineering, biological engineering.
The Characteristics:Â Shell, flume, ejector, tee junction, check valve and gas-extraction nozzle adopt the PP material; pump body and impeller (six flow passages, dual seal) adopt stainless steel plate pressing, the material is in accordance with the SUS standard.
Cyclically use water, save the precious water resources.
Save more than 35% of electricity than other type of vacuum pump.
The fluid muffler purpose made can reduce the gas in water and make the vacuum degree higher and more stable; reduce the friction between gas and fluid, reduce the noise.
Double-tap, double-display, can be used alone or in parallel.
Resist corrosion by acid, alkali and solvents.
The special machine is made by the famous electric manufacture ODM with fluorine rubber sealing , the inner of which can't be intruded by corrosive gas.
The Requirement:
Need to replace the water in the flume regularly to ensure the purity of water  quality, the vacuum degree and to avoid dirty stains.
Can be used to extract corrosive gas, need to shorten the period of water changing.
Specification:Model |
TR-SHB-III/IIIA/IIIS/IIIG |
Power(W) |
180 |
Power supply(V/Hz) |
220/50 |
Flow(L/min) |
80 |
Lift(m) |
10 |
MaximumVacuumDegree(MPa) |
0.098 |
Single Tap Air Sucking Amount(L/min) |
10 |
Number of taps |
2 |
Safety functions |
Check valve |
Capacity of water storage tank(L) |
15 |
Materials of Water Tank |
PP |
Dimensions(mm) |
385L×280W×420H |
Weight(kg) |
11 |
Packing:
Company Information:
      As a diversified manufacturer of high-tech products, it was founded in 1999, and devoted to the products, sales and technical service for various industries and fields like Energy analysis instrument, Oil, coal, steel, and geology; medical analysis and application instruments, biochemistry analyzer, elisa reader, blood analyzer,and urine; as well as laboratory application instruments,autoclave/sterilizer,freeze dryer, incubator,drying oven,balance,ICP,DRS,HPLC,gas chromatography,and spectrophotometer,meanwhile,TRYTE Technologies integrated and purchased some companies of PCB board, highway instruments at home and abroad. Our company has become the "one stop" instrument procurement service provider worthy of the name.
      TRYTE technologies (TRYTE) mainly sell products by selling direct to customer, but also through distributors, resellers and manufacturer representatives, telephone sales and e-commerce sales, customers cover all over 80% of the world's countries and regions.TRYTE have solutions with rules adaptability according to the specific requirements of the design, from the instrument to some laboratories or departments.Whichever kind of solution you choose, you can fully trust it, because it is proved from 100, 00 successful results, leading development process, and decades of actual certification experience.
Why choose us?
1. We supply high quality products with reasonable price.
2. We are the professional manufacturer;
3. Advanced production machine;
4. Strict quality control system;
5. Ten people research&develop team;
6. We have professional sales team;
Â
Water Circulating Multi-purpose Vacuum Pump/Laboratory Instruments
The Introduction:
   Providing vacuum condition for the processes of evaporation, distillation, crystallization, drying, sublimation, filtration and decompression, degassing and so on, particularly be suitable for labs and small scale test of industries such as universities and colleges, scientific research institutes, chemical industry, pharmacy, biochemistry, foodstuff, pesticide, agricultural engineering, biological engineering.
The Characteristics:Â Shell, flume, ejector, tee junction, check valve and gas-extraction nozzle adopt the PP material; pump body and impeller (six flow passages, dual seal) adopt stainless steel plate pressing, the material is in accordance with the SUS standard.
Cyclically use water, save the precious water resources.
Save more than 35% of electricity than other type of vacuum pump.
The fluid muffler purpose made can reduce the gas in water and make the vacuum degree higher and more stable; reduce the friction between gas and fluid, reduce the noise.
Double-tap, double-display, can be used alone or in parallel.
Resist corrosion by acid, alkali and solvents.
The special machine is made by the famous electric manufacture ODM with fluorine rubber sealing , the inner of which can't be intruded by corrosive gas.
The Requirement:
Need to replace the water in the flume regularly to ensure the purity of water  quality, the vacuum degree and to avoid dirty stains.
Can be used to extract corrosive gas, need to shorten the period of water changing.
Specification:Model |
TR-SHB-III/IIIA/IIIS/IIIG |
Power(W) |
180 |
Power supply(V/Hz) |
220/50 |
Flow(L/min) |
80 |
Lift(m) |
10 |
MaximumVacuumDegree(MPa) |
0.098 |
Single Tap Air Sucking Amount(L/min) |
10 |
Number of taps |
2 |
Safety functions |
Check valve |
Capacity of water storage tank(L) |
15 |
Materials of Water Tank |
PP |
Dimensions(mm) |
385L×280W×420H |
Weight(kg) |
11 |
Packing:
Company Information:
      As a diversified manufacturer of high-tech products, it was founded in 1999, and devoted to the products, sales and technical service for various industries and fields like Energy analysis instrument, Oil, coal, steel, and geology; medical analysis and application instruments, biochemistry analyzer, elisa reader, blood analyzer,and urine; as well as laboratory application instruments,autoclave/sterilizer,freeze dryer, incubator,drying oven,balance,ICP,DRS,HPLC,gas chromatography,and spectrophotometer,meanwhile,TRYTE Technologies integrated and purchased some companies of PCB board, highway instruments at home and abroad. Our company has become the "one stop" instrument procurement service provider worthy of the name.
      TRYTE technologies (TRYTE) mainly sell products by selling direct to customer, but also through distributors, resellers and manufacturer representatives, telephone sales and e-commerce sales, customers cover all over 80% of the world's countries and regions.TRYTE have solutions with rules adaptability according to the specific requirements of the design, from the instrument to some laboratories or departments.Whichever kind of solution you choose, you can fully trust it, because it is proved from 100, 00 successful results, leading development process, and decades of actual certification experience.
Why choose us?
1. We supply high quality products with reasonable price.
2. We are the professional manufacturer;
3. Advanced production machine;
4. Strict quality control system;
5. Ten people research&develop team;
6. We have professional sales team;
Â
In Custom Mechanical Components, shaft parts are suitable for maintenance operations of one or more CNC Machined Parts. Shaft parts are one of the typical parts often encountered in hardware accessories. It is mainly used to support transmission parts, transmit torque and bear loads. According to the different structural forms of shaft parts, they can be generally divided into optical shafts, stepped shafts and special-shaped shafts. Three types of shafts; or divided into solid shafts, hollow shafts, etc.
Centering CNC lathe (centering machine / longitudinal cutting lathe) is a CNC machine tool mainly used for precision machining of shafts and non-standard shafts. It has a qualitative leap compared to CNC lathes in processing efficiency and processing accuracy The use of dual-axis tool arrangement greatly reduces the processing cycle time. By shortening the tool exchange time between the tool arrangement and the opposite tool table, the multiple tool table overlap function, the thread chip effective axis movement overlap function, and the direct spindle during secondary machining The indexing function shortens the idling time. The cutting tool is always processed in the clamping part of the spindle and the workpiece, ensuring that the accuracy of the processing remains unchanged. The maximum processing diameter of the core walking machine in the market is 42mm, which has a great advantage in the precision shaft processing market. This series of machine tools can be equipped with an automatic feeding device to realize the fully automated production of a single machine tool, reducing labor costs and product defect rates. Very suitable for mass production of precision shaft parts.
Motor shaft,Shaft Parts,Custom Shaft,Shaft Components,Threaded Shaft,Drive Shaft
Dayue Seiko Technology (Dongguan) Co., Limited , https://www.dayuechn.com