US Department of Energy releases integral LED lamp test requirements

Recently, the US Department of Energy (DOE) issued a federal bulletin on the test procedure for integrated LED lamps. Integral LED lamps required to enter the United States must be tested in a qualified laboratory in accordance with the requirements of this test procedure to obtain total luminous flux, input power, efficacy, correlated color temperature, color rendering index, power factor, lifetime and standby. Data such as power. The regulation came into effect on August 1, 2016 and was enforced on December 28, 2016. According to the requirements of this regulation, the above parameters must be tested in accordance with the standards of LM-79, LM-84, TM-28 and IEC6 2301. In addition, from August 1, 2016, DOE-controlled LED Lighting Facts (color label) will be suspended for all new replacement Lamps submissions, as the new integrated LEDLamps DOE test program: DEPARTMENT OF ENERGY 10 CFR Parts 429 and 430 came into effect on August 1, 2016. Moreover, DOE is about to officially release the non-integrated LEDLamps test program for non-integrated LEDLamps. Any application for listing submitted before August 1, 2016 will continue to be processed. Products that have already been listed for the DOE LED Lighting Facts are still kept in the database database. The LED Lighting Facts Working Group will conduct further investigations and research on the latest DOE regulations and will notify all partners as soon as a final decision is made. DOE LED Lighting Facts will continue to accept the delivery of LED luminaires and refurbished kits. DLC has also revised its requirements for LED Lighting Facts. From August 1, 2016, it will no longer be required to submit LM-79 data for bare lamps to LED Lighting Facts. Please note that DLC will continue to accept certification applications for lamps. This change does not affect DLC's requirements for LEDLightingFacts for other categories of products. About DOE LED Lighting Facts: DOE LED Lighting Facts is a voluntary performance labeling program for the US Department of Energy DOE for LEDSSL solid state general lighting products including: integrated LED bulbs, non-integrated LED bulbs, LED fixtures, and LED retrofit kits. Through this project, LED manufacturers can submit samples in authorized laboratories based on industry standards such as IESNALM-79-08, and then submit reports to obtain DOE LED Lighting Facts, thus showing their excellent product performance. North American latest standard express UL 1993 standard update At present, with the continuous introduction of new LED lamp (TypeA/B/C), LED filament lamp, LED module driverless, etc., UL is updated according to new products and new technologies. Relevant technical requirements of the standard. The latest UL certification requirements for LED light source products and the update of the UL 1993 standard are as follows:

Woven Bag Punching Machine

This unit uses dual extruders and dual tractors to compound multiple substrates by casting, and complete the bright compounding process of the front and back of the plastic woven bag in one production process. The unit has high degree of automation, advanced technology and convenient operation. The whole machine adopts PLC operating system, linkage control, automatic temperature control of each extruder, automatic suction, and the composite product has strong adhesion fastness, good effect, uniform thickness and good sealing performance.

The cement bag perforating needle rollers and woven bag perforating needle rollers developed by our company adopt imported alloy steel wire needles with high strength and good abrasion resistance. With advanced drilling technology, the processing precision reaches the same level in the world.

The base material of this series of needle rollers generally adopts hard aluminum alloy and copper alloy, which has the characteristics of good quality, low price, economical and practical.

Our company specializes in the supply of woven bag needle rollers, cement bag needle rollers, and woven bag needle rollers wholesale. The product quality and processing technology reliability and stability are at the domestic advanced level. We can produce various special specifications of needle rollers according to customer requirements. Needle ring products. Customers are welcome to consult.

non-woven needle roller,Automatic punching machine equipment, woven bag double-sided punching machine, cement bag punching needle roller, woven bag punching needle roller, Cement bag woven bag ultra-micro hole punching machine

Changzhou Puyisen Machinery Technology Co., Ltd. , https://www.czsmmsmachine.com