Track Roller Guide Blocks and Rails Roll Forming Machine Supplier Germany

Model NO.: BOSJ-E
Customized: Customized
Advantage: Use Widely
Condition: New
Making Machine: Multifunctional
Control System: PLC Control System
Material of Roller: Gcr 15
Machine Type: Automatic
Trademark: BOSJ
Origin: Jaingsu China

As the elevator's guidance system, the elevator guide rails are an important component affecting the safety and stability of elevator.it is one part of the inner workings of most elevator and lift shafts, functioning as the vertical and internal tracking rail.The guide rails are fixed to two sides of the lift shaft; one guide is for the elevator car and the other for the counterweight. In tandem, these rails operate both as stabilization within the shaft during routine use and as a safety system in case of emergency stops.

Frequently Asked Questions - Elevator Guide Rails
What difference is there between cold-drawn and machined guide rails?
The process for cold-drawn involves stretching the material thus modifying its structure.Machined guide rail is by stripping the edgings.
Why can not the cold-drawn guide rails be used at speeds over 1.6 m/sec?
Because the cold-drawn process produces short bends caused by the variations in the raw material thickness rolled along the section.These bends make the lateral acceleration rates high.
Do the guide rails wear out?
No, guide rails under normal working conditions do not wear out because both the guide shoes and the rollers are softer than the guide rails.The guide rail may only be damaged through the action of the safety gear.
Why are guide rails made of steel?
Guide rails carry out functions of both guiding and safety,since they are the structural member on which the safety gear works.Steel is currently the cheapest material that perfectly meets these two requirements.

Equipment Structure

This production line takes full hydraulic driven, it is reliable, high accuracy and high efficiency, etc.
The overall production line is the production equipment combined with technologies such as leveler/punching, roll forming, cutting, etc.
The production line is composed of de-coiler system, punching system, roll forming system, cutting system, electric control system, etc.

Technical parameter
,NO. Name unit parameter remark

1
materials Type
Mild steel  galvanized sheet
Plate strength
≥350
Plate thickness mm 1.5~2.5
2 specification mm        
See the picture

3 speed m/min 6~8
4 Material of the roller
GCr15 Hardening treatment
5 drive type
Gear box
6 power kw About40
7 Electrical control system
PCL frequency control
8 Size(lengthXwidthXheight) m 35X4X3.9



Shower Filter

Shower Filter,Shower Head Filter,Ionic Shower Head,Shower Head Water Filter

Suzhou Puretal Electric Co.,Ltd , https://www.puretal.com