The advantages of roller pressure tester

Introduction: The roller pressure tester can detect the usage of the equipment. The printing pressure is used to compensate for the machining error of the machine. If there is no printing pressure, due to the processing and installation errors of the machine, the two rollers cannot completely contact the surface. No uniform transfer of ink can be guaranteed.

The advantages of roller pressure tester

Roller pressure tester is a printing equipment manufacturer and equipment user. It is used to test equipment pressure related equipment. The printing pressure is used to compensate for the machining error of the machine. If there is no printing pressure, due to the processing and installation errors of the machine, the two rollers cannot completely contact with each other on the surface, and thus the uniform transfer of the ink cannot be guaranteed. There are unevenness errors on blankets, plate surfaces, and paper. These errors must also be eliminated, so the printing pressure is also a reflection of the machine's accuracy.

Taking Shanghai Keyin Trading Co., Ltd. as an example, it encountered various kinds of information feedback from users during its nearly ten years of work practice. In the printing process, ink transfer is accomplished through printing pressure, and the pressure is too high. Deformation is easy to paste version, the pressure is too small, the ink becomes weak, and the ink becomes poor in permeability. Adjusting the printing pressure to the best is one of the reasons for printing good prints.

From the point of view of the printing apparatus, the smaller the printing pressure, the greater the periodic impact and vibration. Only consider the printing pressure of printing equipment should be zero, but in fact this is impossible.

The roller pressure tester has the following three characteristics: simple equipment (a handheld device, a flexible sensor sheet and a calibrator group), a measurable maximum peak (999N/cm2), and easy operation and management (digital display).

Based on the above three characteristics, the advantages of the roller pressure tester are also reflected. Because the equipment is simple, only one operator can complete the monitoring pressure by jogging the device to pass the tip area of ​​the sensor sheet through the pressured area. All pressures have a pressure curve, and we can see how the pressure spikes change through the roller pressure tester.


Stretcher Board

Stretcher Board,Board Stretcher,Board Stretcher Tool,Calf Stretch Board Diy

nantong pinli fitness co.,ltd , https://www.ntcnpinlifitness.com