Soil moisture tester national standard detection and measurement accuracy

The soil moisture tester plays an important role in the field of moisture detection. There is a certain contradiction between the measurement accuracy and the measurement speed. In view of this situation, there is provided an apparatus for rapidly determining moisture with a drying method. Soil moisture tester ensures accurate weighing; circular infrared heating source, rapid drying of the sample; in the drying process, the soil moisture tester continuously measures and instantly shows the sample lost moisture content%, after the drying process is completed, the final measured moisture content value Locked to show. Compared with the international oven heating method, infrared heating can quickly and uniformly dry the sample at high temperature, and the sample surface is not easily damaged. The detection results are in good agreement with the national standard oven method, which is replaceable, and the detection efficiency is much higher. In the oven method. Intelligent operation, general samples can be measured in just a few minutes, is a new type of rapid detection equipment.

Soil water is the main source of plant water absorption (except for hydroponic plants). In addition, plants can directly absorb a small amount of water that falls on the leaves. The main source of soil water is precipitation and irrigation water, and it participates in the water cycle of the lithosphere-biosphere-atmosphere circle-circle-water circle.

The analysis of the soil moisture tester found that the soil moisture mainly comes from atmospheric precipitation and irrigation water. In addition, the increase of groundwater and the condensation of water vapor in the atmosphere are also sources of soil moisture. Moisture forms various types of water and reflects different properties due to various forces such as gravity, capillary attraction, water attraction, and gravitation on the surface of soil particles. Solid water, ice crystals formed when soil water freezes. Vapor water, present in the soil air. Bound water, including hygroscopic water and membrane water. Free water, including capillary water, gravity water, and groundwater.

For VOLVO Cylinder Seal Kit

The hydraulic cylinder sealing kit is an important component in the hydraulic system, used to prevent hydraulic oil leakage and protect the pistons and rods inside the hydraulic cylinder.
Choosing the correct hydraulic cylinder sealing kit can extend the service life of the hydraulic system and improve work efficiency.
The following are some key points for purchasing a hydraulic cylinder sealing kit:
1. Determine the model and specification of the hydraulic cylinder: The size and model of the hydraulic cylinder sealing kit must be completely matched with the hydraulic cylinder, otherwise it may cause poor sealing or damage to the sealing components.
2. Choose appropriate sealing materials: The sealing materials for the hydraulic cylinder sealing kit should be selected based on factors such as the type of hydraulic oil, temperature, pressure, etc. The commonly used sealing materials are fluororubber, Butyl rubber, polyurethane, etc.
3. Choose a reliable supplier: Choose a legitimate hydraulic cylinder sealing kit supplier to ensure product quality and after-sales service.
4. Pay attention to installation and maintenance: Proper installation and maintenance of the hydraulic cylinder sealing kit can extend its service life and reduce maintenance costs.

For Volvo Cylinder Seal Kit,For Volvo Bucket Cylinder Seal Kit,Volvo Swing Motor Seal Kit,Volvo Bucket Cylinder Seal Kit

Safe Seal Technology Co., Ltd. , https://www.jsspreals.com