Pre220/250 Two Stage PVC Pelletizing Extruder (Planetary Extruder with Single Screw Extruder)

Model NO.: PRE220/250
Engagement System: Full Intermeshing
Exhaust: Exhaust
Automation: Automatic
Computerized: Computerized
Application: Sheeting; Pelletizing; Filming
Advantage: Strong Capacity
After-Sales Service Provided: Engineers Available to Service Machinery Overseas
Trademark: LANHANG
Specification: ISO9001: 2000
Origin: China
HS Code: 8477
Model NO.: PRE220/250
Engagement System: Full Intermeshing
Exhaust: Exhaust
Automation: Automatic
Computerized: Computerized
Application: Sheeting; Pelletizing; Filming
Advantage: Strong Capacity
After-Sales Service Provided: Engineers Available to Service Machinery Overseas
Trademark: LANHANG
Specification: ISO9001: 2000
Origin: China
HS Code: 8477

Introduction & Application of Our PRE Series Planetary Roller Extruder 

The "PRE" series of planetary roller extruder, experiences rolling and extrusion in configuration that a planetary screw is inter-engaged at a center of a main SCREW and BARREL which are screwed in a shape of helical gear at 45°. The planetary screw revolves and rotates on its axis, in order to employ various resin


The extruder has the advantages of multi-application, can be used for sheeting, filming instead by using banbury mixer/open mill mixer, and used for high capacity pelletizing, its capacity could reach to 2000kg/h.

 

In special, because the extruder supplies the rolling and extrusion through space of the inter-engagement, it may plasticize the resin at a low temperature.


Through the inter-meshing action of the toothed planetary roller system just one single revolution of the main spindle suffices to roll out the plastic melt as many as 1,100 times, ensuring optimum plastification, homogenization and dispersion.

 

The "PRE" is a low-temperature forming extruder which may produce without any change of properties owing to its low-temperature forming and homogenizing.


Combined rolling and extruding action: through the inter-meshing action of the toothed planetary roller system just one single revolution of the main spindle suffices to roll out the plastic melt as many as 1,100 times, ensuring optimum plastification, homogenization and dispersion.


Compared with other extruder designs, this system increases the contact surface of the melt by up to five times.


Low-cost formulation: the optimum heat-exchanging effect created by the large contact surfaces of the planetary roller system in conjunction with short residence time of the melt helps to achieve a considerable reduction in formulation costs. Costly stabilizers and lubricants are reduced to a minimum.


Self-cleaning feature: since all toothed components of the machine constantly inter-mesh, no residual material is left in the machine when changing over from one formulation to another. The system is change-over from one color to another, results in no more than 5kg of scrap.

 

 Why Choose  from Lanhang

 

1. Since1992, with more than 20 years' professional experience

 

 2. Overseas service center available (in Europe, Japan, Dubai, etc.)

 

 3. International CE, SGS, IAF, CNAS certification

 

 4. National high-tech enterprise / products

 

 5. Various National Patent for Inventions Letters for rubber & plastic machinery

 

 6. ISO9001:2008 management

Product 1:

Item\Model

PRE125

PRE 150

PRE 170

PRE 190

PRE220

PRE 255

Main motor power(kw)

55

75

90

132

200

250

Speed of the main screw(rpm)

60

Stuffy power(kw)

0.75

0.75

1.5

11

11

11


Pre220/250 Two Stage PVC Pelletizing Extruder (Planetary Extruder with Single Screw Extruder)
Product 2:

 Double stage extruder:

The first compounding extruder runs at a high speed for good mixing and high output capacity.The second extruder must be a larger diameter single screw one that can run at lower screw speed .The lower screw can avoid over -heating by internal cooling system and strong heat exchange ability .The functional separation allows operator to more flexibly control the expectable material mixing process and temperature.

 
Pre220/250 Two Stage PVC Pelletizing Extruder (Planetary Extruder with Single Screw Extruder)

 

Model No.

 Item

 Screw Diameter   

       (mm)

 Motor Power

     (kw)

PRE-150/200

PRE-150 planetary screw extruder

      150

      75

SJ-200 single screw extruder

      200

      75

PRE-180/220

PRE-180 planetary screw extruder

       180

     132

SJ-220 single screw extruder

      220

      90

PRE-220/250

PRE-220 planetary screw extruder

      220

     185

SJ-250 single screw extruder

      250

     110

PRE-255/300

PRE-255 planetary screw extruder

      255

     240

SJ-300 single screw extruder

      300

     132

 
Pre220/250 Two Stage PVC Pelletizing Extruder (Planetary Extruder with Single Screw Extruder)

Introduction & Application of Our PRE Series Planetary Roller Extruder 

The "PRE" series of planetary roller extruder, experiences rolling and extrusion in configuration that a planetary screw is inter-engaged at a center of a main SCREW and BARREL which are screwed in a shape of helical gear at 45°. The planetary screw revolves and rotates on its axis, in order to employ various resin


The extruder has the advantages of multi-application, can be used for sheeting, filming instead by using banbury mixer/open mill mixer, and used for high capacity pelletizing, its capacity could reach to 2000kg/h.

 

In special, because the extruder supplies the rolling and extrusion through space of the inter-engagement, it may plasticize the resin at a low temperature.


Through the inter-meshing action of the toothed planetary roller system just one single revolution of the main spindle suffices to roll out the plastic melt as many as 1,100 times, ensuring optimum plastification, homogenization and dispersion.

 

The "PRE" is a low-temperature forming extruder which may produce without any change of properties owing to its low-temperature forming and homogenizing.


Combined rolling and extruding action: through the inter-meshing action of the toothed planetary roller system just one single revolution of the main spindle suffices to roll out the plastic melt as many as 1,100 times, ensuring optimum plastification, homogenization and dispersion.


Compared with other extruder designs, this system increases the contact surface of the melt by up to five times.


Low-cost formulation: the optimum heat-exchanging effect created by the large contact surfaces of the planetary roller system in conjunction with short residence time of the melt helps to achieve a considerable reduction in formulation costs. Costly stabilizers and lubricants are reduced to a minimum.


Self-cleaning feature: since all toothed components of the machine constantly inter-mesh, no residual material is left in the machine when changing over from one formulation to another. The system is change-over from one color to another, results in no more than 5kg of scrap.

 

 Why Choose  from Lanhang

 

1. Since1992, with more than 20 years' professional experience

 

 2. Overseas service center available (in Europe, Japan, Dubai, etc.)

 

 3. International CE, SGS, IAF, CNAS certification

 

 4. National high-tech enterprise / products

 

 5. Various National Patent for Inventions Letters for rubber & plastic machinery

 

 6. ISO9001:2008 management

Product 1:

Item\Model

PRE125

PRE 150

PRE 170

PRE 190

PRE220

PRE 255

Main motor power(kw)

55

75

90

Direct Warping Machine

Direct Warping Machine

A-ZEN direct warping machine is a new-developed machine with advanced function. A brand new closed circuit tension technology, known as PID technology, is used on direct warping machine AZ118L type, and because of that, yarn tension stability and accuracy are both assured. Meanwhile, the computerized real-time monitoring system can detect beams` diameters in a accurate way.

Technical Data:

Warp Line Speed: 100-1,000m/min;

Beam Size: Φ21"*21", Φ30"*21", Φ40"21";

Control Way: Computerized real-time control;

Tension Roller: Real-time PID adjusts yarn tension in closed loop control;

Beam Up-and-down, Clamping and Brake: Pneumatically Operated;

Main Motor: 7.5KW AC-frequency controlled with constant linear speed and closed circuit;

Brake Torque: 1600NM;

Air Connection: 6 Bar;

Copy Precision: Beams` perimeters are recorded;

Maximum Counting Range: 99999 meters/circles.

Direct Warping Machine,Copy Function Warping Machine,Beam Waping Machine,Yarn Warping machine

CHANGHZOU A-ZEN TEXTILE TECHNOLOGY CO.,LTD , https://www.warpknittingmachinery.com