According to the statistics of China Association of Automobile Manufacturers, in January 2017, domestic trucks (including non-integrated vehicles and semi-trailer tractors) were sold and produced 267,500 vehicles and 271,700 vehicles, and the production decreased 25.45% month-on-month, an increase of 4.68% year-on-year; the sales decreased by 14.60% month-on-month. %, an increase of 20.71% over the same period of last year, and the sales growth rate showed an increasing trend compared with December 2016 (a year-on-year increase of 18.24% in December). In January 2017, the sales growth of domestic trucks (including non-integrated vehicles and semi-trailer tractors) has been increasing month by month in May (September 2016 increased by 11.46% year-on-year, up 11.52% year-on-year in October, compared to November The growth rate was 16.38%, an increase of 18.24% over the same period in December).
In January 2017, the market for heavy trucks (including non-complete vehicles and semi-trailer tractors) increased by 125.15% year-on-year, a substantial increase from the previous month (up 54.14% year-on-year in December 2016); medium trucks (including non-complete vehicles) The market decreased by 10.22% year-on-year, and the increase was negative from the month (+7.78%). In 2017, the heavy truck (including non-complete vehicles, semi-trailer tractors) market continued unabated in the first month with a growth rate of 125.15%, continuing to reeleve the monthly market segment of the truck market.
Heavy truck production and sales:
In January 2017, heavy trucks (including non-complete vehicles and semi-trailer tractors) produced and sold 81,849 cars and 83,017 cars. The output decreased by 16.66% month-on-month and increased by 87.62% year-on-year; the sales volume increased by 10.22% compared with the previous month and increased by 125.15% year-on-year. The increase in production volume has narrowed, and sales growth has increased (December 2016 production and sales increased by 131.34% and 54.14% respectively).
In January, the top 5 companies that sold heavy trucks (including non-integrated vehicles and semitrailer tractors) were: FAW Group (24,801 units), China National Heavy Duty Truck (13,306 units), Dongfeng Motor Corporation (12,805 units), Shaanxi Automobile Group ( With 11155 units and Beiqi Foton Motor (6919 units), 5 companies sold 68,886 vehicles, accounting for 83.10% of the total sales of 83,017 heavy trucks (including non-complete vehicles and semi-trailer tractors) in January. In January 2017, the market for heavy trucks (including non-integrated vehicles and semi-trailer tractors) increased by 125.15% year-on-year, a substantial increase from 54.14% in the previous month. In January, four companies in the heavy-duty truck (including non-complete vehicles and semi-trailer tractors) market sold over 10,000 units. In December 2016, there was a â€œrecoveryâ€ trend of FAW Group (only selling 7,096 units in December 2016, ranking Fifth) This month broke out again, with 24,801 units of monthly sales returning to the top of the sales chart.
As can be seen from the above table, compared with the previous month, the top 5 companies in January sales increased 1 to 4; compared with the same period of 2016, all 5 companies achieved growth. In January, among the top five companies that sold heavy trucks (including non-integrated vehicles and semi-trailer tractors), only one company in the East ranked first in the FAW Group to achieve a quarter-on-quarter increase. From an increase, the highest is FAW Group, reaching 229.54%, and the growth rate of the other four companies is not low. The growth rate of Sinotruk and Shaanxi Automobile Group also exceeds 100%.
In January, the top 5 manufacturers of heavy trucks (including non-integrated vehicles and semitrailer tractors) were: FAW Group (18,353 units), Dongfeng Motor Corporation (15,878 units), China National Heavy Duty Truck Group (13,316 units), Shaanxi Automobile Group ( With 13,206 units and Beiqi Foton Motor (7651 units), 5 companies produced 68,404 units in total, accounting for 83.57% of the total output of 81,949 heavy trucks (including non-complete vehicles and semi-trailer tractors) in January.
As can be seen from the above table, in the previous month, all the top 5 companies in January heavy truck output declined. Compared with the same period of last year, all of them achieved growth. The highest increases were achieved by Sinotruk and Shaanxi Automobile Group, which reached 123.31% and 124.67 respectively. %, the lowest increase in Beiqi Futian also has 53.60%.
Grain cleaning machine Gravity Stone Remover
after raw material cleaning in grain processing plants, to grading grain, concentrate to clean impurities, (such as blighted wheat, small corn cobs, etc.) and to remove sand, mud. It use wind, vibrating and sieving effect matching technology, to be high efficiency, great performance on grading and separating gravel, mud pieces, low power consumption, no dust leakage, low noise, easy operation and maintenance.
1. Advanced design and excellent fabricating
2. Reliable and excellent stone separation and efficient cleaning
3.High specific capacity
4. Easy operation and maintenance
5. Two options: with or without air-recycling system.
6. A fan is equipped on the air-recycling type and a special separator is installed ahead of the fan. The separator deflects the aspirated air through a lamellar system so that dust and chaff are separated from the air and dischar
ged by an airlock valve while the cleaned air is recycled by the fan in the air return pipe to the destoner
1.The machine is designed for separating stones from a continuous product stream
2.On the basis of differences in specific gravity, reliable removal of highdensity impurities such as stones and pieces of metal and glass is achieved.
3. Versatile application in flour mills, rice mills, feed mils and seeds selection processing.
1.The sieve box which is normally equipped with two layer sieves is supported by hollow rubber springs and is caused to oscillate by one or twovibrators depending on machine execution.
2.The grain is spread by a feeder across the entire width of the machine, and then the product stream is stratified on the pre separation screen according to its specific gravity by the oscillating motion of the screen and by the air flowing through the product from bottom to top. The light particles collect at the top, and the heavy ones including the stones at the bottom.
3.The lower layer with the heavy particles flows upward and is fed to the final separation zone of the bottom de-stoning screen. Final separation of the stones from the grain is accomplished by a countercurrent of air.
4. The stone free product streams on the two screens float on cushions of air, flowing slowly toward the product outlet, and then are discharged through the squeezed rubber valves.
5. To achieve the optimum degree of separation, the inclination of the screens, the air volume and final separation can be adjusted accordingly.
The process of flour milling:
The process of flour milling (from corn to milled into corn flour) usually consists of the following:
1. corn storage (silos, or warehouse)
2. cleaning system (sifter, destoner, seprater, magnet, scourer, etc)
3. dampening (dampener, conditioning silos, etc)
4. milling system (roller mill, plansifter, purifier, impact detacher, etc.)
5. Flour pressure and blending system (if need)
6. flour packing and stacking
DingZhou YongSheng Grain and Oil Machinery Co., LTD is a professional company combining research and development design, production and sales as a whole. The company has first-class oil equipment manufacturing base, professional oil technology engineer and professor, possesses advanced production technology and sophisticated equipment, All the mechanical parts are manufactured by our company.
The complete sets of oil equipment that we manufactured, relying on many domestic scientific research institutions. Advanced technology, suitable for making all kinds of plant oil. From the raw material of cleaning up, prepressing, leaching, refining and the production processing of by-product (such as Phospholipids engineering, protein engineering), is totally a dragon design and production, has created considerable economic benefit and social benefit for the user and society more than 40 years. Company new development of biodiesel equipment technology in recent years, has put dozens of sets on the market, obtaining good economical benefits both In the domestic and overseas. At present, we have hundreds of successful installation operation of the oil equipment engineering experience, can design and product according to the difference of the user's economic condition. raw material. regional, install oil equipments.
YongSheng comapny with scientific management method, strives for perfection the manufacturing process, innovative manufacturing idea, fast grows and become the grain and oil machinery production and export base in China. Company products are exported to Russia, India, Nepal, Indonesia, South Africa,Tanzania,Ethiopia,Ukraine, kazakhstan, Pakistan, Iran, north Korea, Vietnam, France and the European Union and so on more than 30 countries and area.
Grain Destoner,Grain Stone Removing Machine,Seed Cleaning Machine,Grain Destoner Gravity Machine
Dingzhou Yongsheng Grain & Oil Machinery Co.,Ltd. , https://www.oilpresschina.com