A visit to the Crimson Aerial facility in Ephrata, PA two weeks ago revealed three units at different stages of the production process. One was already on its way to the company’s South Dakota location for body installation, while another was a few days behind schedule. The third chassis had not yet had the aerial mounted and was still in an earlier phase of assembly. At this point, all three units should have arrived in South Dakota and are likely progressing through the next steps of their build.
![Chicago Crimson aerial in production]( "Crimson_plant_CFD-1-JC")
![Chicago Crimson aerial in production]( "Crimson_plant_CFD-2-JC")
![Chicago Crimson aerial in production]( "Crimson_plant_CFD-4-JC")
![Chicago Crimson aerial in production]( "Crimson_plant_CFD-5-JC")
![Chicago Crimson aerial in production]( "Crimson_plant_CFD-6-JC")
![Chicago Crimson aerial in production]( "Crimson_plant_CFD-7-JC")
![Chicago Crimson aerial in production]( "Crimson_plant_CFD-8-JC")
![Chicago Crimson aerial in production]( "Crimson_plant_CFD-9-JC")
Observing the progress of these units gives insight into the detailed and meticulous nature of the manufacturing process. Each step, from the initial frame assembly to the mounting of the aerial and the integration of various components, requires precision and coordination. It's clear that the team at Crimson Aerial is working efficiently to ensure each unit meets the high standards expected by their customers. As these units move forward, it's exciting to see how they will be customized and delivered to their final destinations.
One of Chicago's aerials at the Crimson facility in Ephrata, PA with the aerial mounted is ready to travel to South Dakota for the body installation.
The rear view shows the completed aerial assembly.
The frame rails extend beyond the torque box to accommodate the body.
Directly behind the cab is the front set of stabilizer jacks.
The rear jacks are beneath the turntable.
Two sections of a ladder for another truck have been assembled in the shop.
Closeup of the mid-section tip prior to the addition of the fly-section.
The torque box is being mounted to this chassis as the ladder is completed elsewhere in the plant.
Shijiazhuang Zhongjia Slurry Pump Co.,Ltd. , https://www.zhongjiapump.com