1. Low noise, easy operate
2. Adopt after cutting
3. Wring punching, smooth, smaller burr
| No. | main parameter of C shaped roll forming machine | |
| 1 | Suitable to process | Steel |
| 2 | Width of the plate | 100-300mm |
| 3 | Rollers | 14 rows |
| 4 | Dimensions | 8.0*0.8*1.5m |
| 5 | Main Power | 11 kw |
| 6 | Hydraulic pump power | 11 kw |
| 7 | Thickness of the plate | 1.5-3.0mm |
| 8 | Productivity | 8-10m/min |
| 9 | Weight | About 5T |
| 10 | Voltage | 380V 50Hz 3phases |
| 11 | Material of the cutting plate | Gr15 |
| 12 | Processing precision | Within 1.00mm |
Screw chiller is called screw chiller because of its key component-compressor. The unit is made of gas refrigerant from the evaporator; after the compressor is adiabatically compressed, it becomes a high temperature and high pressure state. The compressed gas refrigerant is cooled and condensed in the condenser at equal pressure, and after condensing, it changes into a liquid refrigerant, and then expands to a low pressure through a throttle valve to become a gas-liquid mixture. The liquid refrigerant under low temperature and low pressure absorbs the heat of the material to be cooled in the evaporator and becomes gaseous refrigerant again. The gaseous refrigerant re-enters the compressor through the pipeline and starts a new cycle. The principle flow of screw chiller is divided into air cooling and water cooling.
Water Cooled Screw Chiller,Screw Water Chiller,Water Cooled Screw Compressor Chiller,screw top water cooler,screw water cooled liquid chiller,water cooled screw chiller trane,Water cooled flooded screw chiller, Screw type water chiller plant‎
Shenzhen Toyocool Refrigeration Equipment Co.,Ltd. , https://www.toyochiller.com